You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
These commands may be sent over the serial line. The preceding semicolon ';' defines, that the command is targeted onto the small USB-serial chip.
- ;C2560_RES - RESET the 2560 uC
- ;C32u2_RME - Set operation to Non reset mode
- ;C32u2_RMD - Set operation to reset mode
- ;C32u2_SNR - Read serial number
- ;C32u2_SNW - Store serial number
- ;C32u2_SHI - Set the serial to a high value (typically 1Mbaud)
- ;C32u2_SLO - Set the serial to a low, default value (typically 115200baud)
- ;C32u2_FWV - get the version of this firmware
11:46
https://github.com/prusa3d/32u2-usbserial/blob/master/Arduino-usbserial.c